Front

|
Show 9 Of 23
Showing 9 Of 23 results
Part # A-3120 | Model Year 28-31
Goes upside down under the axle to retain the large A-3125 felt.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.80 EA
Part # A-3036 | Model Year 28-48
The special nut used to hold the perch in the front axle.
DISCONTINUED
Temporarily
OUT OF STOCK
$3.25 EA
Part # A-3034 Model Year 28-31
Part # A-3034-Q4 Model Year
The steel bushing that the spring shackle fits into. One in the perch, and the other in the leaf spring. 4 are needed. Once installed, they'll need drilled or reamed. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-3030 | Model Year 28-31
Very good quality. Forged with the shackle bushing installed. Fits 1928-31.
DISCONTINUED
Temporarily
OUT OF STOCK
$74.95 EA
Part # A-353029-M | Model Year 28-31
Modern style 5/16" angled press-in style ball zerk. For Spindles. Need 2. Goes in the top hole of the spindle where the spindle arm attaches. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.65 EA
Part # A-353029 | Model Year 28-31
Original style 5/16" angled press-in style. For Spindles. Need 2. Goes in the top hole of the spindle where the steering arm attaches. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-353026-M | Model Year 28-31
Modern 5/16" straight press-in style ball zerk. Need 16. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.35 EA
Part # A-353026 | Model Year 28-31
Original style 5/16" straight press-in style. Need 16. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.55 EA
Part # A-3111-B | Model Year 28-31
4 are required, 2 for each spindle. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$3.95 EA