Part #
A-18109
|
Model Year
26-31
For use when mounting our fog lamps to either the bumper bars or the bumper brackets. If mounting to the bumper brackets, the slots in the clamping portion of the bracket will need to be enlarged slightly. The upper portion of the bracket can be rotated 360 degrees to place the fog lamp in the desired position. Can be used with 1926-27 Model T's or any Model A's.
Part #
A-18480-12
|
Model Year
28-31
This is a universal aftermarket heater. It uses the coolant system for its heat. You will have to run hoses to this unit from your motor. Unit is about 7" square. U.S.A. See radiator section for hook- up kits.
You'll want to install a thermostat for optimum performance.
12-VOLTS
Part #
A-18478-P
|
Model Year
30-31
This panel installs on the firewall where it has been chopped up for a heater door. Fits 30- early 31. 4-1/2" tall, 8" wide. U.S.A.
Part #
A-18480-K
|
Model Year
09-31
This kit is required for installing a hot water style heater in your car. The kit gives you 8' of 5/8" I.D. heater hose, elbow style shut-off valve that is 3/8 pipe thread on one side and has 5/8" hose barb on the other, 3/8 pipe thread to 5/8" hose barb, 3/8 ID to 1/2 OD pipe adapter, and 4 hose clamps. U.S.A.
Part #
A-18576-ASB
Model Year
28-29
Part #
A-18576-BSB
Model Year
30-31
These brackets are needed when adding a luggage rack to the back of a Model A that has a spare tire on the back. Extends the rack beyond the spare tire.
These are the heavy duty brackets that are made out of 3/8" thick steel and powder coated black. When putting a trunk on your luggage rack, we recommend these as they're much stronger than the regular brackets.
These can not be used if you are running the long front style bumpers on the back of your car.
Part #
LT-28
|
Model Year
09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.
Part #
LT-32
|
Model Year
09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.
Part #
LT-45
|
Model Year
09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.
Part #
LT-38
|
Model Year
09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.