Accessories

|
Show 18 Of 110
Showing 18 Of 110 results
Part # A-18101-G | Model Year 09-31
COMES WITH THE BRACKETS
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$195.00 PR
Part # A-18575-2 | Model Year 28-31
1/4" carriage bolt that is used to hold the wood or steel strips onto the chrome or stainless luggage rack. It is 3/4" long. Solid stainless, not a clad headed zinc carriage bolt. Bolts have no head markings and have a polished head. Bolt comes with a stainless keep nut. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$1.75 EA
Part # A-18104 | Model Year 28-31

Attaches to your closed car dash rail and provides a handy place to hold your cell phone or GPS.  Simply hook the mounting bracket over the top front edge of your dash rail and bend the mounting bracket downard to fit to your application.  There is a felt pad on the bracket where it rests on the top and face of the dash rail.  The part of the metal bracket that hooks on the front edge of the dash rail has a rubber coating to protect the paint.

Sides will adjust in to about a 2" wide phone and out as far as about 3-1/2".  Once arms are adjusted to suit the devise you're using, just slide the devise in and out when traveling.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$49.95 EA
Part # A-18422-FUL | Model Year 28-31
A copy of the original Fulton pedal pads as sold in the Model A days. Rubber pads are held to the pedals with chrome trim. 4" X 1-5/8"
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$33.50 PR
Part # A-18575-B | Model Year 28-31

A very nice chrome plated luggage rack.

Note: when in the up position you see the wood slats, when in the opened position the wood slats face the ground, the trunk does not rest on the wood! . It will fit all models and years of the Model A. The trunk area is 13"x34-1/2." IMPORTANT: After mounting your luggage rack, it is VERY important you check the tightness of the bolts securing the wooden slats to the rack. They must be snug enough to secure the wooden slats but over-tightening can damage the wood. We recommend using a thread locker which is readily available from your local parts store.. If you are not familiar with this product, it is a liquid that you apply to the threads and when it dries, it secures the nut to the bolt so it doesn't back off. NOTE: Will not work with a 16" rear spare tire.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$249.95 EA
Part # A-18573-B | Model Year 30-31
2-piece chrome plated brackets. Includes both inner and outer brackets for supporting the sport light. Correct cad plated slotted hex head clamping screws included. Fits all 30-1 closed cars and straight windshield 4-door sedans. Mounting instructions and template included. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$145.00 EA
Part # A-18812 Model Year 28-31
Part # A-18813 Model Year 28-31

These consoles are made to set on the floor in position between the gear shift lever and the seat riser. Black molded plastic, covered and stitched in black naugahyde.

Gear shift lever boots are black naugahyde with drawstring included. Measure the distance and see which one works better for you. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-18120 | Model Year 28-31
All steel one-piece cup holder mounts to the back side of the dash rail on most Model A's. Does not fit all 1928-29 4-door sedans and 1929 Cabriolets without drilling a hole. Fits all other Model A's without drilling required. Holds two canned drinks, water bottles, 16 oz. drink bottles and insulated coffee mugs. Bare steel. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$51.00 EA
Part # A-18572-A Model Year 28-29
Part # A-18572-B Model Year 30-31
Part # A-18572-C Model Year 31-31
Just what you need for touring in those hot temps! Mounts to the inside of the firewall. Has a black plastic facing that has mold marks to resemble the old original firewall insulators Ford started using in 1932 called the "chicken track"  U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks