Part #
T-3152-E
|
Model Year
12-27
Gear set used on the Atwater-Kent Model LA distributors. U.S.A.
Part #
T-3152-D
|
Model Year
12-27
This gear set was used on the cast iron Atwater-Kent front plate distributor. This was used on the slant mounted distributors. U.S.A.
Part #
T-3152-C
|
Model Year
12-27
Drive gear set used on the Atwater-Kent cast iron front plate distributor with the vertical mounted shaft. U.S.A.
Part #
T-2503-MBX
|
Model Year
13-27
Set of 7 authentic style bolts and nuts that hold the 2 rear axle housings together. Bolts are made out of 4140 high tensile strength steel! 1913-27. U.S.A.
Part #
T-2825-OR
|
Model Year
09-27
Bolts only, sold in a set of 6. Nuts must be purchased separately. Bolts are zinc plated. USA
Part #
T-3837-OR
|
Model Year
09-27
Authentic style rear spring center bolt with a 1/2" tall head. Bolt is 3" from under the head to the end of the threads. Bolt is 3/8" with coarse threads. Will work on springs up to 10 leaves, cut down for shorter springs. U.S.A.
Part #
T-5044-W
|
Model Year
19-23
For the show car, we can offer this authentic style block. It is a very hard rubber material that uses wood screws. Used on 1919-23 T's with wooden firewall. U.S.A.
Part #
T-5044-EO
|
Model Year
23-27
For the show car, we can offer this authentic style block. It is a very hard rubber material that uses wood screws instead of machine screws like our T-5044-E block. Used on 1923-27 steel firewall cars. Unless you are going for all out show, stick with the regular T-5044-E terminal block. U.S.A.
Part #
T-3876-1215
|
Model Year
12-15
This style of strap is a little different than the T-3876-TW that was also used from 1912-15. Instead of having the end of the strap sewn around the footman loop, it wrapped around the footman loop and is secured with buckles T-3876-LB. These special buckles and footman loops must be purchased separately. Black leather. U.S.A.