Part #
T-3221-L
|
Model Year
1/4 oz. tube of extreme pressure lubricant recommended for lubricating the Anderson style timer contacts/brush assembly. Anderson timers come pre-lubricated but this will be needed for future maintenance. U.S.A.
Part #
T-3221-TSB
|
Model Year
09-27
The Anderson timer was a very popular aftermarket timer back in the T days. This is a replacement rotor (flapper) that mounts to the camshaft. U.S.A.
Part #
T-3858
|
Model Year
09-22
Angled saddle arm was used for 1909-22 Roadsters. This is the arm that your top saddle mounts to that supports the top when it is folded down. U.S.A.
Part #
T-3858-T
|
Model Year
09-22
Angled saddle arm was used for 1909-22 Touring. This is the arm that your top saddle mounts to that supports the top when it is folded down. U.S.A.
Part #
T-2737-P
|
Model Year
09-27
End plug only for the APCO radius cap. U.S.A.
Part #
T-2737-S
|
Model Year
09-27
Ball seat only for the APCO style radius ball cap. U.S.A.
Part #
T-2737
|
Model Year
09-27
Complete APCO style radius cap that replaces the original Ford T-2736 cap. Kit includes the housing, seat, spring, and end plug. U.S.A.
Part #
T-2737-SP
|
Model Year
09-27
Spring only for the APCO style radius ball cap assembly. The spring goes between the seat and the plug. U.S.A.
Part #
T-2728-ACC
|
Model Year
09-27
Apco accessory style spring loaded ball cap kit. For use on the tie rod and drag link. Takes two per car, replaces T-2728. Comes with ball seat, spring, cotter pin and end plug. U.S.A.