keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
LIGHT SWITCH ROD
Complete with the wire contacts, insulators, horn button and escutcheon. The length is measured on the tube part from the top of the tube where the tube goes into the head, down to the keeper groove.
NOTE: A-3616-B is used on the 7-Tooth Columns and A-3616-C is used on the 2-Tooth columns. U.S.A.
Below are shaft measurements , not light switch rod measurement. If your original light rod is missing, measure the steering shaft with a piece of string or wire.
A-3616-B = 44-1/2"
A-3616-C = 43"
A-3616-F = 44-1/2"
A-3616-G = 43"
A-3616-H = 44"
Product List
Part #
A-3616-B
|
Model Year
28-29
Complete with the wire contacts, insulators, horn button and escutcheon. The length is measured on the tube part from the top of the tube where the tube goes into the head, down to the keeper groove. This particular light rod was used on all 1928-29's with the 7-tooth steering box. Head and horn button are chrome plated. 45-3/4" long. USA
Part #
A-3616-C
|
Model Year
29-29
Complete with the wire contacts, insulators, horn button and escutcheon. The length is measured on the tube part from the top of the tube where the tube goes into the head, down to the keeper groove. This rod was used on all 1928-29's with the 2-tooth steering box. Head and horn button are chrome plated. 45" long. U.S.A.
Part #
A-3616-F
|
Model Year
30-30
Complete with the wire contacts, insulators, horn button and escutcheon. The length is measured on the tube part from the top of the tube where the tube goes into the head, down to the keeper groove. Used in 1930 originally but could be found on any 1930-31. Head is chrome plated, horn button is black phenolic. 45-3/4" long. USA
Part #
A-3616-G
|
Model Year
30-30
Complete with the wire contacts, insulators, horn button and escutcheon. The length is measured on the tube part from the top of the tube where the tube goes into the head, down to the keeper groove. Used in 1930 in the Gemmer steering boxes but could be found in any 1930-31. Head is chrome plated with a black phenolic horn button. 44-31/32" long. USA
Part #
A-3616-H
|
Model Year
30-31
Complete with the wire contacts, insulators, horn button and escutcheon. The length is measured on the tube part from the top of the tube where the tube goes into the head, down to the keeper groove. This is the most common length found in 1930-31 Gemmer steering boxes. Rod length is 45-31/32". Chrome plated head with a black phenolic horn button. USA