keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
SWITCH ASSEMBLY 19-25
Part #
T-5012
|
Model Year
19-25
A fair repo of the early style black switch assembly. You will need to purchase an amp meter and the amp meter adapter ring to complete this switch assembly. Includes two keys.
Part #
A-10850-C
|
Model Year
28-31
This is the later style used by Ford in 1926-27. Use an adapter T-5017-D for use in earlier switch panels. Same amp meter was used by Ford from 1928 through 1931. 30-30 amp. Quality is fair!
Part #
T-5012-MB
|
Model Year
19-25
Set of 3 screws and lock washers used to hold the amp meter or amp meter adapter plate to the T-5012 switch panel. These screws are 6/32 thread and will only fit original dash panels. The reproduction panels have a 5/40 screw size, these will not fit those panels.
Part #
T-5013-BX
|
Model Year
19-27
This key is made for the reproduction T-5012 and T-5012-D ignition switches. Original switches had the key number cast into the face of the tumbler where the key inserts, reproduction switches do not have any numbers. U.S.A.
Part #
T-5017-D
|
Model Year
19-25
When Ford started using a smaller amp meter in 1926 they brought out this ring so the smaller amp meter could be used in older cars.
Part #
T-5038
|
Model Year
19-27
This short wire goes under the dash from the amp meter over to the switch. U.S.A.
Part #
T-5042
|
Model Year
19-27
This wire loom fits all cars with dash mounted switches. Switch-dash harness. U.S.A.