keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
COIL POINTS 1 COIL SET
Part #
T-5008-B1
|
Model Year
09-27
Genuine KW coil points. Set consists of 1 upper and 1 lower point. U.S.A.
Part #
A-12199-X
|
Model Year
09-31
Designed for use on point contacts, these burnishers are the perfect tools for removing the oxide layer from the precious metals of fine point contacts. These burnishers feature the following: Plastic insulated handles allow them to be used on live contacts without any shocks or shorts. Removes the oxide layer and any corrosion off contacts without leaving filings or debris. Use for ignition points and coil points on Model T's.
Part #
T-5007-N
|
Model Year
09-27
5 Correct size brass nuts and one zinc nut used to attach the coil points to the coil. U.S.A.
Part #
T-5007-S
|
Model Year
09-27
Years of use and overtightening cause the wooden coils to have recesses in them causing the points to set lower on the coil than they should. Shim the points with these .050 thick brass washers to get things back in line.
Part #
T-5008
|
Model Year
09-27
Often the tops of the coils are recessed where the coil points/hardware have been overtightened causing poor point alignment. This hard fiber plate slides over the 4 point mounting studs to get your points back into alignment. U.S.A.
Part #
T-5008-ESP
|
Model Year
13-17
Coil spring that slides over the threaded stud of the coil to keep upward pressure on the upper coil point. Fits 1913-17 coils, has a free length of 9/16". U.S.A.
Part #
T-5008-SP
|
Model Year
17-27
Coil spring that slides over the threaded stud of the coil to keep upward pressure on the upper coil point. Fits 1917-27 coils, has a free length of 27/64". U.S.A.