keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
CARB CONTROL UPPERSWIVEL
Part #
T-4132
|
Model Year
26-27
The upper portion only for the carb control swivel assembly. Spider is included. You will need to purchase the T-6213-B listed in the carburetor section to complete the unit.
Part #
T-4129-B
|
Model Year
26-27
The late 1926-27 carb control rod that is used on the swivel top style carbs. Ford originally made several different lengths of these. This is the longest and may need shortened in some cases. The knob is pinned so if the rod needs shortened, you can simply redrill a new hole and repin the knob. U.S.A.
Part #
T-4591
|
Model Year
26-27
In 26-27 the T's did not have a separate rod to choke the carb. This sleeve slips up the carb control beyond the cotter pin hole. A piece of wire goes from this sleeve down to the choke arm so when you pull up on the carb control, you choke the carb. U.S.A.
Part #
T-6213-B
|
Model Year
26-27
This is the lower section only of the carb adjusting needle that was used on the 1926-27 Holley NH carbs. The universal spider is not included. You will need to purchase the T-4132 to complete the unit. U.S.A.