keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
ADJUSTABLE CRANK PULLEY 3 1/4" DIAMETER 09-19
Part #
T-3963-AX
|
Model Year
09-19
This pulley is a big help if you have wobble problems with your original pulley. Sometimes the end of the crankshaft where the pulley rides gets worn and the original style pulleys just don't run true. This pulley is slit so once it is slid into position and the ratchet pin is in place, there is an allen headed set screw that will lock the pulley tightly on the crankshaft. This aluminum pulley also has grooves on each side to keep the belt from slipping off. Because of the ridges, in order to install this T-3963-AX pulley on 1909-16 Model T's, the pan must be removed from the block. U.S.A.
Part #
T-3910
|
Model Year
09-27
If you have an old pump with a 1/2" shaft, this pulley will work for you. Ribbed on the edges to keep the belt from slipping off. Held on with an allen headed set screw. U.S.A.
Part #
T-3963-A
|
Model Year
09-19
A machined aluminum crank pulley that runs true. Ridged on front and back to eliminate the problem of the belt slipping off. U.S.A.
Part #
T-3963-AR
|
Model Year
09-16
This pulley is a big help if you have wobble problems with your original pulley. Sometimes the end of the crankshaft where the pulley rides gets worn and the original style pulleys just don't run true. This pulley is slit so once it is slid into position and the ratchet pin is in place, there is an allen headed set screw that will lock the pulley tightly on the crankshaft. The absence of ribs on this aluminum pulley gives the pulley enough clearance to slide over the crankshaft with the oil pan in place. U.S.A.