keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
CRANK SLEEVE
Part #
T-3903
|
Model Year
09-27
This rolled steel bushing is the one that is pressed into the front section of the motor pan. U.S.A.
Part #
T-3905
|
Model Year
09-31
Used in both the Model T and Model A;
- For the Model T it's an exact copy of the original crank pin used to hold the ratchet onto the crank.
- For the Model A it's a special clevis pin for attaching the rod that runs from the cross shaft to the emergency brake handle. Also holds the pawl in place. U.S.A.
Part #
T-3905-SN
|
Model Year
09-27
Replaces the T-3905 pin that holds the crank ratchet to the crank. Makes removal of the crank ratchet a snap for changing the fan belt. U.S.A.
Part #
T-3908
|
Model Year
09-27
Before you slip the crank through the crank guide, this spring slips over the shank, and there is a hole in the crank handle for the spring to lock into. Holds crank away from motor. U.S.A.