keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
INTAKE MANIFOLD 09-27
Part #
T-3062
|
Model Year
09-27
Early style used with any factory carburetors other than the Vaporizor used in 1926-27. They are used manifolds that have been sandblasted. U.S.A.
Part #
T-3063-C
|
Model Year
09-27
Copper clad style, seals the intake and exhaust manifolds to the block. 1909-27. U.S.A.
Part #
T-3063-CR
|
Model Year
09-27
Solid copper style of gasket that keeps your manifolds aligned with the block perfectly. Each ring is actually one piece of copper tubing with an upset ring for sealing. Sold in sets of 6.
Part #
T-3063-S
|
Model Year
09-27
Steel backed style, seals the intake and exhaust manifolds to the block. 1909-27. U.S.A.
Part #
T-3063-X
|
Model Year
09-27
Paper style non-asbestos style, seals the intake and exhaust manifolds to the block. 1909-27. U.S.A.
Part #
T-3063/64
|
Model Year
09-27
The original gland and copper ring type. 12 piece set. Not included in engine gasket sets. U.S.A.
Part #
T-3066-MK
|
Model Year
09-27
This kit gives you a third hand to aid in installation of the manifolds. Bracket threads onto 2 of the manifold studs so the knurled headed bolts can be turned in by hand to hold the manifolds in place while you install the original clamps and nuts on the other two manifold studs. Once you have two clamps in place you remove this tool and replace it with the original clamps. U.S.A.
Part #
T-4130
|
Model Year
09-27
Set of bolts to bolt the carb to the intake. U.S.A.
Part #
T-4134
|
Model Year
09-27
Gasket that goes between the carburetor and the intake manifold. U.S.A.