keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
FRONT CAM BEARING 24-27 SHORT STYLE
Part #
T-3042-B
|
Model Year
24-27
The babbitted bearing that the cam rides in. If number one lobe on your cam is the same as all the other lobes then you use the long style bearing. If number one lobe is wider, use the short bearing. U.S.A.
The Short style front cam bearing was used from 1924-27.
Part #
T-3042
|
Model Year
09-24
The babbitted bearing that the cam rides in. If number one lobe on your cam is the same as all the other lobes then you use the long style bearing. If number one lobe is wider, use the short bearing. U.S.A.
Long style front cam bearing used from 1909-24.
Part #
T-3044
|
Model Year
09-27
The rear camshaft bushing is brass and notched like the original. The notch goes upward on the rear when it gets pressed into the block. U.S.A.
Part #
T-3045
|
Model Year
09-27
A ring to hold the two halves of the camshaft bearing in place. 2 required. U.S.A.
Part #
T-3046
|
Model Year
09-27
Special set screw that holds the camshaft bearing in place. Use on front and center bearing. U.S.A.
Part #
T-3046-E
|
Model Year
09-13
This slotted style set screw was used from 1909-13 before Ford went to a hex style set screw. U.S.A.