keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
.030 NEW BABBITTED ROD
Part #
T-3026-030
|
Model Year
09-27
.030 UNDERSIZE
The same new forged rod as we use for our inserted rod set except that we have babbitted these like the originals. No need to send cores! Rods are very durable, forged from SAE 4140 chrome moly steel. Rods have built in oil dipper. Side of rod with piston pin clamping bolt goes towards the camshaft.
Part #
A-6304
|
Model Year
09-31
Plastigage takes the guess work out of putting the proper clearance in rod and main bearings. A must when checking or adjusting bearing clearance. .001-.003 U.S.A.
Part #
T-3025-M
|
Model Year
09-27
If you have purchased a set of our new forged connecting rods made for insert bearings, these special bolts hold the cap in place. They fit the style of rods that have the inserts that wrap around the edges of the rod. New rods will already have these included, torque the new bolts to 35 ft lbs. Once they have been torqued, they will stretch and should not be reused again. Sold individually. NOT for the T-3024-A stroker rods.
Part #
T-3029
|
Model Year
09-27
This bolt has a thick drilled head and holds the piston pin in the end of the connecting rods. U.S.A.