keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
GAS LINE STEEL WITH TANK IN COWL 26-27
Part #
T-2909-F
|
Model Year
26-27
A length of 1/4" steel line used on 1926-27 T's with the fuel tank in the cowl. Runs from the sediment bowl on the firewall down to the carburetor. U.S.A.
Part #
T-2910
|
Model Year
09-27
Brass gas line fittings. Use felt packing for seal. Need 2 per car. U.S.A.
Part #
T-2913
|
Model Year
09-27
Felt seal for the original gas line pack nut. Need 2 per car. Also used on the spark and gas rods. These 2 small felts are slid over the spark and gas rods after you insert them through the upper bushing. They go about 14" from the handle end. U.S.A.
Part #
T-2915
|
Model Year
09-27
Replaces the elbow fitting where the fuel line enters the carb. Sure beats crawling under the car to shut off the gas! All brass construction and American made! Note: Requires T-2910 Gas Line Pack Nuts and T-2913 Gas Line Seals to complete installation.
Part #
T-2916
|
Model Year
21-27
Two piece clamp with bolt & nut to hold the gas line in place. U.S.A.