keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
SEDIMENT BOWL ASSEMBLY 26--27
Part #
T-2902-C
|
Model Year
26-27
Used on 1926-27 T's that had the gas tank mounted in the cowl. Unit is cast brass so it won t corrode. This is a quality American made unit! Powder coated black! Note: Requires T-2910 Gas Line Pack Nuts, T-2913 Gas Line Seals and T-6905-OR Elbow to complete installation. U.S.A.
Part #
T-2909-F
|
Model Year
26-27
A length of 1/4" steel line used on 1926-27 T's with the fuel tank in the cowl. Runs from the sediment bowl on the firewall down to the carburetor. U.S.A.
Part #
T-2910
|
Model Year
09-27
Brass gas line fittings. Use felt packing for seal. Need 2 per car. U.S.A.
Part #
T-2913
|
Model Year
09-27
Felt seal for the original gas line pack nut. Need 2 per car. Also used on the spark and gas rods. These 2 small felts are slid over the spark and gas rods after you insert them through the upper bushing. They go about 14" from the handle end. U.S.A.
Part #
T-6295-OR
|
Model Year
09-27
Used to connect the gas line from the fuel tank to the carburetor on all years. 1926-27 with the sediment bowl on the firewall will also use this same fitting to connect the fuel line to the sediment bowl. You will also need the T-2910 pack nuts and T-2913 felt seals with this style of fitting. USA