keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
SPINDLE BUSHING REMOVAL TOOL
Part #
T-2713-D
|
Model Year
09-27
Use this tool to easilly remove the T-2713 spindle bolt bushings from the spindles. U.S.A.
Part #
T-2713
|
Model Year
09-27
Spindle bolt (king pin) bushings. These are the shouldered bushings that press into the spindle for the spindle bolts. Well machined brass. When installing they must be reamed and faced for proper fit. U.S.A.
Part #
T-2713-FC
|
Model Year
09-27
When installing new T-2713 spindle bushings, the face of the bushing must be cut to fit your application. This tool slips inside the bore of the bushing and faces the head properly. U.S.A.
Part #
T-2713-R
|
Model Year
09-27
After T-2713 bushings have been installed they must be reamed for the spindle bolt to fit. This special reamer reams both upper and lower bushings at the same time so they are aligned with each other. This is not an of-the-shelf reamer, it is made just for the Model T.
REAMER DIAMETER - .504"
Part #
T-2713-T
|
Model Year
09-27
This tool is used for driving the T-2713 bushings into the spindle. U.S.A.