keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
REAR AXLE SHAFT
Part #
T-2505
|
Model Year
12-27
Now our own manufacture! A tough oil hardened alloy steel axle shaft with precision ground bearing surface. Use the differential gears from your old axles. The T-2505 is made 1/16" longer to accommodate worn hubs. Made of SAE 4130 steel!
Part #
A-4235-SH
|
Model Year
09-48
Tightens up a loose wheel if hub is worn. Also prevents the brake drum from rubbing against the backing plate, .004" thick.
Part #
A-4243
|
Model Year
12-48
Check your old keys to be sure that they aren't worn. Because worn keys can damage the keyway and axles cost more than keys. U.S.A.
Part #
T-2506
|
Model Year
09-27
A tough fiber washer that fits between the axle shafts within the T-2526-B spider. Included in the T-2504-S rear end gasket kit. U.S.A.
Part #
T-2506-B
|
Model Year
09-27
Originally this was a hard fiber washer. This washer is .020" thicker than the fiber washer and will wear much better. This washer is .080" thick. Goes between the 2 axle shafts in the center of the rear end. U.S.A.
Part #
T-2507
|
Model Year
09-27
Castellated cad. plated nuts that hold the hub to the end of the axle shaft. U.S.A.
Torque to 100 foot pounds.
Part #
T-2508
|
Model Year
09-27
A good quality U.S. made bearing. The only drawback with these bearings is that they do not have the grease grooves in the rollers like the originals did so you have to be sure to keep them well greased.
Part #
T-2509-BH
|
Model Year
12-27
For the left side of 1912-27 Model T's. The locating dimple is about 1/2" from the end of the sleeve. U.S.A.
Part #
T-2509-H
|
Model Year
12-27
For the right side of 1912-27 Model T's. The locating dimple is about 1/2" from the end of the sleeve. U.S.A.
Part #
T-2509-SP
|
Model Year
09-27
One of the handiest tools made for the Model T mechanic. Remove or replace sleeve without danger of twisting the sleeve out of shape. U.S.A.
Part #
T-2510-C
|
Model Year
09-27
Use this part number to order individual inner felt seals. U.S.A.
Part #
T-2510-C-Q2
|
Model Year
Use this part number to order the inner felt seals in pairs. U.S.A.
Part #
T-2521-B
|
Model Year
11-27
Used in attaching the gear on the axle shaft. U.S.A.