keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
TOP CORNER WOOD TUDOR REAR
Part #
AWD-1027-6
|
Model Year
28-31
These boomerang shaped pieces of wood go in the rear corners of the Tudor Sedan bodies where the rear top molding wraps down to the rain gutter. They are included in top wood kits. U.S.A.
Part #
A-47789
|
Model Year
28-31
This is just the metal housing only, it does not include the bracket that attaches it (A-47790 or A-47791) to the body or the filler material (AWD-1027-7). It mounts in the rear upper corner of the Tudor Sedan body and is what the corner of the headliner is tacked into. The metal housing is the same, right or left. Priced individually, 2 are needed if you're missing them on both sides. USA
Part #
A-47790
|
Model Year
28-31
This little bracket attaches to the end of the A-47789 tack strip housing and is what anchors it to the body. This bracket is for the left (drivers side). Used on 1928-31 Tudor Sedan. U.S.A.
Part #
A-47791
|
Model Year
28-31
This little bracket attaches to the end of the A-47789 tack strip housing and is what anchors it to the body. This bracket is for the right (passenger side). Used on 1928-31 Tudor Sedan. USA
Part #
AWD-1027-7
|
Model Year
28-31
This is the tack strip only that you will have to install in your metal retainer. Goes in the rear upper corners of the 1928-31 Tudor Sedan interior. This is what your tacks go into to hold the rear corner of the headliner in place. The metal piece that this slides into is not being reproduced. Hardware included. U.S.A.