keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
HEADER COUPES AND TUDOR SEDANS
Part #
AWD-1025-1
|
Model Year
28-29
Wooden header that goes at the front of your top material above the windshield opening. There is a box style piece of metal above the windshield opening (A-174-A), this sets on top of that metal box and the A-174-DS slips over the forward side of this header. Fits 1928-29 Coupe and Tudor Sedan. Included in top wood kits. U.S.A.
Part #
#51
|
Model Year
28-31
Ford used these nails for attaching the body and top wood to the sheet metal of the body. They are just over 5/8" long, and come in packs of 100. U.S.A.
Part #
A-174-DS
|
Model Year
28-29
Used on Coupes Tudor Sedans. This panel slips over the face of the wood header above the windshield. The finish on the steel one normally needs some finishing touches because it is hand made.
Part #
A-47301-TA
|
Model Year
Nails used to secure the top moldings to the body. These were originally 3/4" long but we made them 1" long in case you have some questionable wood where the original nails were. Flat head (.150" dia) with a slight countersink under the head. Stainless steel with a ring shank. .072" diameter. U.S.A.
Pack of 100
Part #
A-47771-A
|
Model Year
28-29
Used on the 1928-29 Coupe/Tudor. Attaches the header to the rib rail. The rib rail is the piece of wood that runs front to back and holds the roof ribs that run side to side in place. Sold in pairs only.