keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
SPARK ROD SLEEVE
Part #
A-9758
|
Model Year
28-31
Cut about 1/4" out of your spark rod that runs from the steering column to the distributor and install this sleeve. Locks with two allen set screws. Allows you to set the extremes of your spark adjustment. U.S.A. "Genuine Nu-Rex."
Part #
A-9742
|
Model Year
28-31
6" throttle control rod. Runs from the bottom of your gas rod on the steering column over to the throttle linkage that bolts to the back of the motor. U.S.A.
Part #
A-9742/57
|
Model Year
28-31
Cadmium plated control rods with the spring loaded ends. Ours are a bit more expensive than others, but they are made correctly and seat on the ball properly. Set consists of 3 rods: Spark, Throttle, and Accelerator. 1928-31, U.S.A.
Part #
A-9747
|
Model Year
28-31
Cadmium plated control rods with the spring loaded ends. Ours are a bit more expensive than others, but they are made correctly and seat on the ball properly. 10-1/2" carb control rod. Runs from the throttle linkage that bolts to the back of the motor to the carburetor. U.S.A.
Part #
A-9757
|
Model Year
28-31
Cadmium plated control rods with the spring loaded ends. Ours are a bit more expensive than others, but they are made correctly and seat on the ball properly. 17" rod that runs from the spark rod on the steering column to the distributor. U.S.A.