keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
ADJUSTMENT NEEDLE DRIVER CAD
Part #
A-9570-C
|
Model Year
28-31
The adjustment needle driver for the carb. Cad plated as original. Joins the choke rod to the A-9525 adjusting needle. Works on any year, Zenith and Tillotson. U.S.A.
Part #
A-9525
|
Model Year
28-31
The brass adjustment needle that is controlled by your choke rod. This is an important item to your car's performance. Make sure that your point is in good shape. U.S.A.
Part #
A-9528
|
Model Year
28-31
For Zenith and Tillotson carbs. Has 1/8" npt threads where it threads into the carburetor. A-9525 adjusting needle threads inside this part. U.S.A.
Part #
A-9547-MB
|
Model Year
28-31
Special threaded nut that holds the choke arm onto the choke shaft. This nut is thicker than the normal nut. U.S.A.
Part #
A-9548
|
Model Year
28-31
The lever only for the choke shaft. Later stamped steel style that was used from early 1930 but will work on any year. U.S.A.
Part #
A-9705
|
Model Year
28-31
This sleeve on the choke rod holds the rod to the choke driver.