keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
ADJUSTMENT NEEDLE HOUSING
Part #
A-9528
|
Model Year
28-31
For Zenith and Tillotson carbs. Has 1/8" npt threads where it threads into the carburetor. A-9525 adjusting needle threads inside this part. U.S.A.
Part #
A-9525
|
Model Year
28-31
The brass adjustment needle that is controlled by your choke rod. This is an important item to your car's performance. Make sure that your point is in good shape. U.S.A.
Part #
A-9532
|
Model Year
28-31
The adjustment needle went into this brass seat in the 28-9 Zenith carbs. The later carbs were machined in the carb casting and didn't use this one. Don't get this seat confused with the A-9575 compensator jet! This jet has a taper for the A-9525 adjusting needle to engage. U.S.A.
Part #
A-9570-C
|
Model Year
28-31
The adjustment needle driver for the carb. Cad plated as original. Joins the choke rod to the A-9525 adjusting needle. Works on any year, Zenith and Tillotson. U.S.A.
Part #
A-9570-CP
|
Model Year
28-31
The adjustment needle driver for the carb. Cad plated as original. The driver is what joins your choke rod to the A-9525 adjusting needle. Authentic pinned style that was used from the beginning of production until September of 1930 but will work on any year. U.S.A.