keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
CAST IRON HEADER
Part #
A-9430-HX
|
Model Year
28-31
For improved performance, this header performs the same as a tube type header but is quieter than tube type headers. Comes with adapter from 3" to 2" for stock Model A mufflers. You must run a downdraft intake with this. Can not be used with A-6705-F oil filter system. Header and Weber Intake will need to be modified for correct clearance. U.S.A.
Part #
A-5252
|
Model Year
28-31
Put a bead of this high heat sealant on the flange of the muffler where it bolts to the manifold for a tight seal. Works great!
Part #
A-9430-N
|
Model Year
28-34
A set of 4 brass nuts used to mount the manifold. Brass won't corrode! U.S.A.
Part #
A-9431
|
Model Year
28-34
Set of 4 studs that screw into the block to mount the manifold. Our studs are American Made and are grade 8 material.
Part #
A-9443
|
Model Year
28-31
Extra heavy cup shaped washers that hold the intake and exhaust manifolds in place. The crown or high point of the washer goes away from the motor. U.S.A.
Part #
M-214
|
Model Year
09-31
Calyx manifold dressing is a paste that applies easily to your exhaust manifold to give it that bare cast iron finish. Very little maintenance is required and touch ups are a breeze! 3 oz. can. U.S.A.