zoom_in
Makes installing a hot water heater in your Model A a breeze! Long pipe replaces your lower water pipe. Has a nipple for the original petcock as well as a nipple for the return hose with the fitting. The shorter pipe splices into your upper radiator hose it has a nipple for the temperature gauge as well as the water pick-up connection. Pipes are powder coated black and include clamps for the upper pipe. The upper fitting has a special scooped inlet to force water into heater. U.S.A.
This is a universal aftermarket heater. It uses the coolant system for its heat. You will have to run hoses to this unit from your motor. Unit is about 7" square. U.S.A. See radiator section for hook- up kits.
You'll want to install a thermostat for optimum performance.
12-VOLTS
This is the best hose you can buy. Red in color like Ford used. The larger size for the top and the smaller for the bottom for the 1928-29 Model A's. U.S.A.
Short lower hoses are 1-3/4" I.D. x 3-1/2" long
Upper hose is 2" I.D. x 7-1/4" long.
Made just like the old originals. These are the black hoses with the red rubber tracer running the length of the hose. Kit gives you the larger hose for the top and 2 smaller diameter hoses for bottom. Fits 1928-29 When installing, position with the red stripe at the top. U.S.A.
2 short lower hoses are 1-3/4" I.D. x 3-1/2" long
Upper hose is 2" I.D. x 7-1/4" long
This is the best hose you can buy. Red in color like Ford used. The larger size for the top and the smaller for the bottom. 1930-31. U.S.A.
Lower hoses are 1-3/4" I.D. x 3-1/2" long
Upper hose is 2" I.D. x 9" long
Made just like the old originals. These are the black hoses with the red rubber tracer running the length of the hose. Kit gives you the larger hose for the top and 2 smaller diameter hoses for bottom. Fits 1930-31 U.S.A.
Lower hoses are 1-3/4" I.D. x 3-1/2"
longUpper hose is 2" I.D. x 9" long