keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
OIL PAN GASKET SET 28-31 CORK
Part #
A-6781-C
|
Model Year
28-31
A complete set of all the gaskets needed when removing the oil pan. The cork is a special compound with 90% memory for positive sealing. Torque to 6 foot pounds starting in middle and criss-crossing to front and back ends.
Part #
A-6621-R
|
Model Year
28-34
Use this handy fitting to hold the pump in place when you remove or install the oil pan. The fitting threads in where the slotted pipe thread plug goes on the side of the block between the oil pan and the valve cover at the center. Once it is installed, you thread the bolt in the center of the fitting in against the oil pump so it won't fall out. You thread this bolt in just snug enough to hold the pump, do not over tighten or you will bust the oil pump casing. U.S.A.
Part #
A-6676-MB
|
Model Year
28-31
20 cad plated bolts for bolting up the oil pan. No markings on heads. U.S.A.
Part #
A-6676-MBX
|
Model Year
28-31
For show cars. Thick headed, no head markings. Black oxide finish. U.S.A.
Part #
A-6782
|
Model Year
28-31
Plastic guides thread into the 4 corners of the block to make installing the oil pan and gaskets easier. Slide the gasket up over the guide and then the oil pan. Guides will hold the pan/gaskets in place while you thread the mounting bolts into the block. 5/16-18 thread.