keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right

FLYWHEEL HOUSING ALUMINUM
Part #
A-6395
|
Model Year
28-31
Good crack free flywheel housings are getting harder and harder to find. This is a new housing cast out of 356T5 aluminum. Weighs 4 lbs. less than original. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
OUT OF STOCK
Related Items
Part #
A-6378-MB
|
Model Year
28-31
4 bolts used toward the inner of flywheel housing, and 2 longer bolts to bolt the accelerator assembly on the top. The 4 center bolts are drilled for safety wire.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6380-MB
|
Model Year
28-31
Complete set of bolts and lock washers to bolt the clutch housing to the flywheel housing.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6381
|
Model Year
28-31
Bracket in this kit bolts to the flywheel. The flywheel is then turned so you can be sure the flywheel housing is correctly shimmed against the block. The small bracket is used to determine if the flywheel is seated properly on the crankshaft. Both of these areas can cause vibration if not properly done. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6394
|
Model Year
28-31
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6396
|
Model Year
28-34
Goes between the flywheel housing and the back of the block. Seals the back of the motor where the cam is. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6397
|
Model Year
28-32
Presses into the back of the block to align the flywheel housing when it bolts to the block. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6398
|
Model Year
28-31
Attaches to the flywheel housing just behind the oil pan. Supplied in bare steel. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6398-MB
|
Model Year
28-31
Set of 3 fine threaded bolts and lock washers that hold the 1/2 moon plate A-6398 to the bell housing. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-6400
|
Model Year
28-34
The shim placed between the flywheel housing and the block at the top. .015" thick. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks