keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
28-29 TUDOR REAR BACKREST UPPER SEAT CLIP, 2 REQ'D
Part #
A-47908
|
Model Year
28-29
Clips attach to the upper horizontal piece of wood that the rear backrest spring/upholstery is mounted to. There are slots in the horizontal body brace below the back window that these clips slide into. 2 required. U.S.A.
Fits 1928-29 Tudor Sedan.
Part #
A-47909
|
Model Year
30-31
Clips attach to the upper horizontal piece of wood that the rear backrest spring/upholstery is mounted to. There are slots in the horizontal body brace below the back window that these clips slide into. 2 required. U.S.A.
Fits 1930-31 Tudor Sedan
Part #
A-47910
|
Model Year
28-31
Attaches to the lower area of the bolt flange where the rear body section attaches to the quarter panels. The side of the bracket with the single hole aims forward. The lower clips attached to the bottom of the rear backrest wood bolt to these brackets. U.S.A.
Part #
A-47911
|
Model Year
28-31
Screws to lower horizontal seat backrest wood with two wood screws. Lower hole in clip attaches to the A-47910 bracket in the Tudor Sedan body. Screw holes are 35" O.C,. bottom of the clip should be 1" below the board it is mounted to. Two are required.
Part #
AWD-1513
|
Model Year
28-31
These hardwood frames support the seat spring and provide tacking for the upholstery.