keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
ALUMINUM WINDSHIELD FRAME - SLANT
Part #
A-45410-E
|
Model Year
30-31
Aluminum Windshield Frame - Slant Windshield Model A. Fits Victoria, Slant Windshield 4 Dr. and 68-C Slant Windshield Cabriolet.
Includes the hinge, swing arm brackets and the rubber gasket around the frame. U.S.A.
Part #
A-3403-X
|
Model Year
28-31
Black rubber used for setting the glass in the frame. Coat with oil when installing, makes it slide in easier and will cause rubber to swell for a tight fit. U.S.A.
Part #
A-45463
|
Model Year
28-31
"Used on the closed cars to hold the windshield out for fresh air or closed to seal out the snow. Chrome plated.
Part #
A-45475-S
|
Model Year
28-31
This set is used to hold the swing arms to the windshield frame. 1 kit does both sides. If your windshield brackets do not have the threaded insert, the female nut in this kit will replace it. U.S.A.
Part #
A-45477
|
Model Year
28-31
These chrome cup shaped washers have a hard rubber insert that sets in them for going against the swing arms to grip better. 1 set does both sides. U.S.A.
Part #
A-45482
|
Model Year
28-32
Chrome plated nuts to hold the swing arms when you open the windshield on closed cars.
Part #
A-79501
|
Model Year
28-31
This windshield frame gasket is special for the reproduction aluminum windshield frames. Does both sides and the bottom. It is a "T" shaped profile of rubber instead of the rubber all of the other body styles used. U.S.A.
86 1/2" long