keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
ALUMINUM FRAME CLOSED CAR 28-29
Part #
A-45410-AR
|
Model Year
28-29
#6061 aluminum alloy closed car windshield frames. Close duplicates of originals! Come complete with frame gasket, swing arm brackets, and the mounting hinge. USA
Fits all 1928-29 Closed body styles except Briggs 4-doors.
Part #
#47-A
|
Model Year
28-29
This kit has all of the screws etc. for mounting the windshield hinge to the header, and the special small screws for joining the top and bottom halves of the frame. U.S.A.
This kit is used on 1928-29's.
Part #
A-3403-X
|
Model Year
28-31
Black rubber used for setting the glass in the frame. Coat with oil when installing, makes it slide in easier and will cause rubber to swell for a tight fit. U.S.A.
Part #
A-45463
|
Model Year
28-31
"Used on the closed cars to hold the windshield out for fresh air or closed to seal out the snow. Chrome plated.
Part #
A-45475-S
|
Model Year
28-31
This set is used to hold the swing arms to the windshield frame. 1 kit does both sides. If your windshield brackets do not have the threaded insert, the female nut in this kit will replace it. U.S.A.
Part #
A-45477
|
Model Year
28-31
These chrome cup shaped washers have a hard rubber insert that sets in them for going against the swing arms to grip better. 1 set does both sides. U.S.A.
Part #
A-45482
|
Model Year
28-32
Chrome plated nuts to hold the swing arms when you open the windshield on closed cars.
Part #
A-79501
|
Model Year
28-31
This windshield frame gasket is special for the reproduction aluminum windshield frames. Does both sides and the bottom. It is a "T" shaped profile of rubber instead of the rubber all of the other body styles used. U.S.A.
86 1/2" long
Part #
A-79550
|
Model Year
28-32
This rubber sandwiches between the windshield hinge and the body when it is screwed in place. The round bead of the rubber is exposed and visible from the outside of the car. U.S.A.