keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
DIFFERENTIAL BEARING CUP
Part #
A-4222
|
Model Year
28-34
You will need two of these for inside the differential. U.S.A.
Part #
A-4221
|
Model Year
28-32
You will need a total of 4 of these bearings; 2 in the differential and 2 in the drive shaft. U.S.A.
Part #
A-4221-SH
|
Model Year
28-31
Use this .005" thick shim between the A-4221 Bearing and the differential gear case to compensate for wear. Assemble your rear end with out any gaskets between the axle housing and center section, if axle locks, you are good and don't need these shims. If axle turns freely, add shims until axle locks. Sold individually. U.S.A.