keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
WINDSHIELD FRAME PIVOT STUDS
Part #
A-37158
|
Model Year
21-31
Open cars used these studs where the windshield pivoted. Special thin cone shaped nut for holding the frame cones are included. Set consists of 2 studs and 2 nuts. U.S.A.
Part #
A-351000
|
Model Year
26-36
A nice chrome plated wing nut (3/8-24 thread).
- On a Model A: Used on the open car All years 28-31 used them at the top where the windshield pivots. The 1930-31 also uses them to attach the upper stanchion to the lower stanchion. Therefore a 1928-29 requires two and a 1930-31 requires four.
- On a Model T: Used to lock the windshield in place on the stanchion. 1923-25 requires two, 1926-27 requires 4.
Part #
A-37154-RC
|
Model Year
30-31
Installs between windshield frame and windshield stanchions at the pivot point. Open cars only. These are a quality American made cone with the proper taper. U.S.A.
CHROME PLATED
Part #
A-37154-RP
|
Model Year
28-31
Installs between windshield frame and windshield stanchions at the pivot point. Open cars only. These are a quality American made cone with the proper taper. U.S.A.
PLAIN STEEL