keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
FRONT BRAKE WEDGE
Part #
A-2050
|
Model Year
28-31
For the front brakes, this is the piece that the brake operating pin pushes on to actuate the front brakes. Import, but very good quality!
Part #
A-2051
|
Model Year
28-31
Special bolt that holds the A-2050 in place at the bottom of the front backing plate. Includes A-2052 washer. U.S.A.
Part #
A-2051-F
|
Model Year
28-31
This kit replaces your original A-2051 wedge studs and allows the brake wedge to float which allows the brake shoes to equalize pressure giving better brakes. One kit does both front wheels. U.S.A.
Part #
A-2051-MB
|
Model Year
28-31
Two castle nuts and cotter pins for holding the wedge stud in place on the backing plate. 1 kit does both sides. U.S.A.
Part #
A-2075-SH
|
Model Year
28-31
If your pins or the other operating pin components are worn, just use these shims to take up slack! These will adjust the angle of your front brake actuating lever. U.S.A.
Part #
A-3121
|
Model Year
28-31
Small felt that goes between the bottom of the spindle and the brake backing plate. The A-2075 brake operating pin passes through the center of this felt. U.S.A.