keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
HEATER ASSEMBLY 12-VOLT
Part #
A-18480-12
|
Model Year
28-31
This is a universal aftermarket heater. It uses the coolant system for its heat. You will have to run hoses to this unit from your motor. Unit is about 7" square. U.S.A. See radiator section for hook- up kits.
You'll want to install a thermostat for optimum performance.
12-VOLTS
Part #
A-18480-K
|
Model Year
09-31
This kit is required for installing a hot water style heater in your car. The kit gives you 8' of 5/8" I.D. heater hose, elbow style shut-off valve that is 3/8 pipe thread on one side and has 5/8" hose barb on the other, 3/8 pipe thread to 5/8" hose barb, 3/8 ID to 1/2 OD pipe adapter, and 4 hose clamps. U.S.A.
Part #
A-18481
|
Model Year
28-31
Hose barb for attaching a standard 5/8" heater hose directly to your radiator hoses. Base of this barb is attached to your radiator hose with a threaded plate inside the hose and a top plate for the outside locked with a jam nut.
Part #
A-8270
|
Model Year
28-34
160 degree thermostat that we have welded to a stainless steel piece of pipe. Slips into the upper radiator hose between the outlet and radiator. Pipe keeps thermostat from moving. Something Henry forgot! U.S.A.
Part #
A-8274
|
Model Year
28-31
Makes installing a hot water heater in your Model A a breeze! Long pipe replaces your lower water pipe. Has a nipple for the original petcock as well as a nipple for the return hose with the fitting. The shorter pipe splices into your upper radiator hose it has a nipple for the temperature gauge as well as the water pick-up connection. Pipes are powder coated black and include clamps for the upper pipe. The upper fitting has a special scooped inlet to force water into heater. U.S.A.