keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
RUNNING BOARD BOLT SET FOR CAST IRON BRACE
Part #
A-16452
|
Model Year
28-29
The special bolt with the high crown as original. 24 pieces per set. Bolts, nuts and lock washers. This kit is for Model A's that have the forged style running board brackets instead of the later stamped steel style. The forged style was used from the beginning of production through as late as March of 1929. The inner running board mounting bolts are slightly longer in this kit. U.S.A.
Part #
A-16453
|
Model Year
30-31
The special bolt with the high crown as original. 24 pieces per set. Bolts, nuts and lock washers. This set is for any Model A that has stamped steel running board braces. 1 set does both running boards. U.S.A.
Part #
A-5125-A
|
Model Year
28-31
Pressed steel running board brackets. This one was used for the front of the running board mount. Both right and left are the same. 2 required. They were originally riveted to the frame. We sell both rivets and bolts to mount them. U.S.A.
Part #
A-5130-A
|
Model Year
28-31
Pressed steel running board bracket. Used on the left rear running board mount. They were originally riveted to the frame. We sell both rivets and bolts to mount them. U.S.A.
Part #
A-5130-B
|
Model Year
28-31
Pressed steel running board brackets. Used on the right rear running board mount. They were originally riveted to the frame. We sell both rivets and bolts to mount them. U.S.A.