keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
INNER PANEL NO RUMBLE
Part #
A-161-ABTR
|
Model Year
28-31
This panel is used on 1930-31 Coupes or 1928-31 Roadsters using the rumble area as a trunk. The top fastens to the panel below the deck lid and the bottom attaches to the rear-top edge of the seat riser. Trunk applications still used a seat riser regardless to allow clearance for the rear frame cross member. U.S.A.
Part #
A-159-AB
|
Model Year
28-31
This panel is used in the deck area of Coupes and Roadsters. It was used regardless of whether you were using the back of your car as a trunk or a rumble seat. The reason it was used in trunk applications is that it provided clearance for the rear cross member of the frame. This is the panel that your cushion seat spring would set on. Very good die stamped panels. U.S.A.
Part #
A-160-AB
|
Model Year
28-31
The brackets that support the rain gutter at the rear corner of the rumble compartment. The sides attach to the end of the curved inner panel. U.S.A.
Part #
A-41518
|
Model Year
26-32
The rubber bumpers for the upper corners with a rumble or the lower corners with a trunk. These are also used on 1926-27 Model T's. U.S.A.