zoom_in
The black plastic inserts that go at the base of the headlamp where the wires butt together. This is what joins the contacts in your headlight sockets to the wires coming into the headlamp from your lighting wire harness.
The headlamp conduits are what holds these and the wires in place.
Use this A-14584-AR if you have the early 1928-29 headlamp buckets with the 11/16" I.D. socket holder in the base of the headlamp.
This socket has a flared shoulder at one end to hold it in place. The flared end is captivated between the inside of the headlamp bucket and the base plate that is held in place with 6 rivets. The socket protrudes inward and is what holds the headlamp socket in place that pokes out the bottom of the headlamp. You'll need a set of our A-13011-MB (screws that look like rivets) to re-install the headlamp base plate. Sold individually. U.S.A.
11/16" I.D. socket holder was used on the 1928-January of 1929 headlamp buckets.
