keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right

12 VOLT COIL
Part #
A-12000-12
|
Model Year
19-31
12-volt coil for use on any Model A or Model T running a distributor. Coil bracket must be purchased seperately. Does not require an external resistor.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
OUT OF STOCK
Related Items
Part #
A-12000-CB
|
Model Year
28-34
Bracket to mount the 1928-34 ignition coil.
When running a distributor on your T, you need to use a modern style 6 volt coil. This is the bracket to hold the coil to the firewall or wherever you want to mount the coil. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-12000-MB
|
Model Year
28-31
This is the screw and lock washer set to mount the coil bracket to the firewall. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-12116
|
Model Year
28-31
Simply place this unit between the distributor cap and the coil wire, and it indicates if you have the wires on your coil properly as well as if you have spark or not. Comes with complete usage instructions, genuine Nu-Rex. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-12117
|
Model Year
28-31
Mounts between distributor cap and coil wire to test ignition voltage. Lets you know if your ignition is putting out the proper voltage. This unit will also clear and start flooded engines Comes with instructions. Genuine Nu-Rex. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-14302
|
Model Year
28-31
The black lacquer wire that runs from the coil to the distributor. Comes with two brass wire ends. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-14302-M
|
Model Year
28-31
This is a modern type coil wire that has the ends crimped in place so you're sure you have a good connection. Also has rubber boot installed. "Genuine Nu-Rex". U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part #
A-14305
|
Model Year
28-31
Black cloth covered wire with correct soldered ends. This short wire runs from the negative post of the coil to the terminal box on the firewall. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks