keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
COWL TOP PANEL STEEL 30-31
Part #
A-014-CTBS
|
Model Year
30-31
This is a gas tank dummy for street rod applications. Smooth with no hole where the gas filler used to be. Replaces the gas tank in the cowl. Steel. Fits 1930-31. U.S.A.
Part #
#46
|
Model Year
30-31
Pan head screws and star washers to anchor the front edge of the gas tank to the firewall.1930-31 only.
Part #
#46-B
|
Model Year
30-31
5/16" fine threaded bolts and nuts used to hold the back edge of the gas to the body. Some cars used a 1/4" coarse thread bolts, use #46-BE for those applications.
Part #
#46-BE
|
Model Year
30-30
Used in early 1930, this kit fastens the back edge of the gas tank to the body. This kit uses 1/4" bolts instead of 5/16" like the later 1930 production. The kit contains 12 bolts, 12 nuts and 12 lock washers.
Part #
A-014-CTB
|
Model Year
30-31
Street rodders normally get rid of the stock gas tank in the cowl to allow more room for gauges, radios, air ducts, etc. This smooth laminated fiberglass panel replaces the gas tank and gives you a smooth cowl top. Fits all 1930-31 body styles except the slant windshield body styles. U.S.A.
Part #
A-3405-CW
|
Model Year
28-31
The 1/8" black beaded welt that is used in mounting the gas tank.
Part #
A-35266-BR
|
Model Year
30-31
4 are used on 1930-31 Model A's, 2 on each side. They pinch the fuel tank to the top of the cowl panel and hold your cowl welting in place.
Part #
A-9299-B
|
Model Year
30-31
This thin material goes around the gas tank wherever the beaded cowl welt isn't used. Use this kit for all 1930-31 model A's. Goes between the front of the gas tank and the firewall. USA