keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
TRANSMISSION REBUILD KIT
Part #
A-7005-RK
|
Model Year
28-31
Transmission rebuild kit contains: A-1180 snap ring, 2x A-7005 filler/drain plugs, A-7017-B main drive gear, A-7025 & A-7065 bearings, A-7040 baffle, A-7045-B snap ring, A-7060 main shaft, A-7061 collar, A-7063 spacer, A-7070 snap ring, A-7100 low/reverse gear, A-7101 2nd & high gear, A-7111 cluster gear shaft, A-7113 cluster gear, A-7115 spacer, 2x A-7118 roller bearings, A-7121 roller bearing, A-7140 reverse idler shaft, A-7141 reverse idler gear, A-7153 gasket set, A-7080-B baffle
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
OUT OF STOCK
Product List
Part #
A-1180
|
Model Year
28-38
Snaps into the rear Hub to hold the A-1175 seal in place. Need 2 per car. U.S.A.
Part #
A-7005
|
Model Year
28-31
Nice cad plated plugs for the oil fill hole and the drain hole as well. U.S.A.
Part #
A-7025
|
Model Year
28-48
This ball bearing is used on the main drive in the front of the transmission. Shielded on one side.
Part #
A-7040
|
Model Year
28-48
The transmission main drive gear bearing oil slinger. U.S.A.
Part #
A-7045-B
|
Model Year
28-31
For the main drive gear. Holds the bearing in place. All 1 piece construction, just like the original. U.S.A.
Part #
A-7060
|
Model Year
28-31
The main shaft of the transmission. The roller bearing surface should be checked on your old shaft. U.S.A.
Part #
A-7063
|
Model Year
28-34
This spacer slides over the end of the A-7060 before it is slid into the roller bearing. (A-7118) Prevents roller bearing from damage. U.S.A.
Part #
A-7065
|
Model Year
28-48
This bearing is used on the main shaft in the rear of the transmission.
Shielded on one side.
Part #
A-7070
|
Model Year
28-31
Goes in the transmission case in front of the rear ball bearing. A-7070 goes in the Rear A-1180 goes in the front. U.S.A.
Part #
A-7111
|
Model Year
28-31
For the Model A Transmission. The shaft is fitted with an "O" ring to help keep the oil from leaking. U.S.A.
Part #
A-7115
|
Model Year
28-31
Spacer that goes between the two roller bearings inside the cluster gear assembly. U.S.A.
Part #
A-7118
|
Model Year
28-48
Two of the short bearings are used. One at the front of cluster gear and the other at back of the main drive shaft.
Part #
A-7121
|
Model Year
28-48
The long bearing for the rear of the cluster gear.
Part #
A-7140
|
Model Year
28-31
The shaft for the reverse idler gear. Fitted with an O-Ring to help keep the oil from leaking. U.S.A.
Part #
A-7153
|
Model Year
28-31
All the gaskets needed for overhauling the transmission. U.S.A.