keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
BRAKE-FRONT FLOORBOARD SET
Part #
A-35130/31-X
|
Model Year
28-29
Same as our A-35130/31-A floorboards for vehicles with the emergency brake to the front of the gear shift lever EXCEPT the main board is made in 2 pieces and includes special metal plate and screws for joining the 2 boards together. This makes access to removing or installing a battery a breeze! U.S.A.
Part #
#33-C
|
Model Year
28-31
Set of black oxide screws and special washers for mounting the floorboards in the car. U.S.A.
Part #
A-35123-FP
|
Model Year
28-31
A heavy felt pad fitting tight around steering column and pedals. Use with metal plates. U.S.A.
Part #
A-35123-MB
|
Model Year
28-31
Contains 3 trim washers, 1 wood screw, and 2 machine screws for mounting the A-35123-SP plates to the floor. U.S.A.
Part #
A-35123-SP
|
Model Year
28-31
A two piece steel that holds the felt around the steering column and around the pedals. Keeps the cold and engine fumes out. Powder coated black. U.S.A.
Part #
A-35130-S
|
Model Year
28-31
Brown cotton webbing with tacks that gets put around the edge of the floorboards to seal them up. Nails to outside edge, then folds under the board and gets nailed to bottom as well. USA
Part #
A-35150-A
|
Model Year
28-29
The cover that snaps into the opening over the battery in the floorboards. Made of heavy gauge steel with spring steel retaining clips riveted in place as original. Powder coated black. Used with the early style brake to front floorboards. If you have a 1929 with the emergency brake to the right, you'll need the wider A-35150-B cover. U.S.A.
Part #
A-35245-A
|
Model Year
28-29
The plate covering the area around the gear shift lever. This plate is for the 1928-30 Model A's with the emergency brake handle to the front of the gear shift lever. Powder coated black. U.S.A.
Part #
A-35245-C
|
Model Year
28-31
These clips make it an easy job to remove the floorboards! Just a twist on the clip, and the shift lever plate can be removed. Kit comes with rivets and washers. Semi tubular rivets in the kit are 3/16". U.S.A.
Part #
A-9770
|
Model Year
28-34
A cast aluminum base with screw holes. Mounts to floorboards and provides the anchoring point for the A-9765-R footrest.
Part #
A-9770-MB
|
Model Year
28-31
Three wood screws used to attach the footrest base to the floorboard. U.S.A.