keyboard_arrow_left
keyboard_arrow_right
clear
keyboard_arrow_left
zoom_in
keyboard_arrow_right
zoom_in
3:25 RATIO RING & PINION
Part #
A-4209-325
|
Model Year
28-31
3:25 radio ring & pinion gear set that fits 1928-31 Model A's. This is a pretty high ratio so you'll need a pretty strong motor to run these.
Part #
A-4035-S
|
Model Year
28-31
This gasket set takes care of the rear axle and the universal joint. 9 piece set. U.S.A.
Part #
A-4035-SX
|
Model Year
28-31
Kit includes 4 different thicknesses of axle housing gaskets, .003 .005, .007, and .009, 2 of each size. Also included is torque tube gasket, u-joint housing gaskets/cork strip, speedo case gasket and a pair of hub gaskets.
Part #
A-4210-T
|
Model Year
28-31
This tool is used for removing the drive shaft, pinion cup, and pinion gear assembly from the rear end. U.S.A.
Part #
A-4634
|
Model Year
28-47
The large nut that secures the pinion gear into the pinion bearing assembly. 2 required. U.S.A.
Part #
A-4636
|
Model Year
28-47
The ears of this washer get bent around the pinion bearing nut to secure them in place. Should always be replaced. USA
Part #
M-533
|
Model Year
09-31
The Ford car was designed to use this extra heavy clinging type oil in the rear axle. This oil is almost a grease in weight and clings to the ring gear. Do not overfill. New squeeze bottle with a pour spout. Model T requires 1 quart for the rear axle. Model A requires 2 quarts total for the rear end, transmission and steering box. U.S.A.