MODEL T - FRONT
-
Model T Wrench
T-1349-X
(1909-1927)
$6.50 / ea.
A copy of the old wrench that Ford supplied with the T when it was new.
-
Early Spindle Washer
T-2709-E
(1909-1919)
$14.50 / ea
These spindle washers are used between the outer bearing and the spindle nut.
-
Model T Axle & Steering Nut Set
T-2691
(1909-1927)
$4.00 / set
An 8 piece castellated nut set for the front axle & steering.
-
Model T Rebuilt Spindles
T-2694
(1919-1927)
$145.00 / set
Send us your old spindles and spindle arms and we will: Sandblast and prime parts, install new bushings in the spindle arm, install new bushings in the spindles and align ream them.
-
Model T Spindle Arm Nut
T-2697
(1911-1927)
$1.05 / ea.
Holds the spindle arm onto the spindle body.
-
Steering Stabilizer
A-3283
(1909-1927)
$105.00 / ea.
One end clamps on the tie rod, and the end mounts to the front axle.
-
Model T Outer Ball Retainers
T-2705
(1909-1919)
T-2706
(1909-1919)
These are the outer ball retainers for the old ball style wheel bearings.
-
Model T Spindle Nuts
T-2707
(1911-1927)
T-2708
(1911-1927)
These thread onto the front spindles after the spindle washers.
-
Model T Spindle Washers
T-2709
(1909-1927)
$2.25 / pr.
These washers go behind the castle nut on the front spindles.
-
Model T Hardened/Ground Spindle Bolt Sets
T-2710-AS
(1909-1915)
T-2710-ASB
(1909-1915)
T-2710-BS
(1916-1927)
T-2710-BSB
(1916-1927)
These are the original style with precision machine ground bolts.
-
Model T Spindle Bolt Bushing
T-2713
(1909-1927)
T-2713-Q4
(1909-1927)
Just in case you reamed 'em too big, we sell the bushing only.
-
Model T Spindle Bushing Removal Tool
T-2713-D
(1909-1927)
$23.95 / ea.
Use this tool to easilly remove the T-2713 spindle bolt bushings from the spindles.
