Model A Tail Light
Model A Commercial Tail Light Bracket
$10.95 / ea.
This special cast iron tail light bracket was used on the following vehicles: 1929-31 Station Wagon 1930-31 Panel Delivery 1930-31 Deluxe Delivery 1930-31 Deluxe Pickup & Special Delivery.
Model A Tail Light Bracket Bolts
The special carriage style bolts with a larger than normal head.
Pick Up Tail Light Bracket Mounting Set
Mounts the A-13470 cast iron tail light bracket to the pick bed.
Model A Double Contact Socket
$7.10 / ea.
Use these universal style sockets to convert any side or tail lamp to a dual filament bulb that can be used for turn signals or just to convert a gas lamp to electric! You will have to modify your lamp to accept these.
Model A Cross Over Wire
$12.00 / ea.
When adding a tail light to the right side, this wire will join the two tail lights to the main lighting harness.
License Lens Gasket
$0.50 / ea.
For the clear license lens.
Tail Light Gasket
$0.50 / ea.
This gasket goes between the face of the tail light rim and the lens, but some people put one on each side of the lens to help and avoid cracking the lens.
Model A Pickup Fender Mounting Block
$6.95 / ea.
The wood block for mounting the pick up tail light bracket.
Model A Pigtails
$8.00 / pr.
The wires with the springs & washers that go through the tail light sockets and stick out the back of the tail light 24" long.
Model A Reinforcing Plate
$3.35 / ea.
This plate is used under the fender when attaching the tail light bracket to the fender.
Model A Retainer Clips
$1.20 / set
Two retainers, and screws to hold the license lens into the tail light.
Model A Tail Light Loom
$1.25 / ea.
Ford covered the exposed wires from the tail light through the fender and back under the body a couple of inches.