To order multiple products on this page, enter the quantity for each product you would like to purchase, and then select "add to cart" to checkout.
For the show car, we can offer this authentic style block. It is a very hard rubber material that uses wood screws instead of machine screws like our T-5044-E block. Used on 1923-27 steel firewall...
The terminal block is mounted on the firewall. Complete with all bolts and washers. U.S.A.
This hard rubber style terminal block has 5 positions. Found on 1919's and some early 1920's. The T's that used this terminal block had the generator to amp meter wire in a separate loom outside...
Adapts the pipe threaded T head to accept modern 14MM spark plugs. We recommend using a Champion N16YC plug. Sold in sets of 4. USA
Authentic wire kit with correct black loom and rubber bushings. A must for the purist! Runs from the timer to the coil box. U.S.A.
This short wire goes under the dash from the amp meter over to the switch. U.S.A.
For the purist, we can offer these authentic wire kits. 1909-14 sets have copper ends, others have brass ends. U.S.A.
Authentic style brass spark plug nuts for the Model T. The T-5202 nuts have the original 8/32" thread and work on the Champion plugs. The T-5202-M have the 4x7mm thread and work on Motorcraft...
Orange with a black tracer. We offer this by the foot for other applications or if you want to make your own plug wires. 7mm is for distributors, 9mm for the other applications. This is a non-returnable...
This harness takes care of the wires that hook up to the timer. U.S.A. This harness is for any year of T that does not have a starter.
This harness takes care of the wires that hook up to the timer. U.S.A. For cars with a starter up to 1925, you will use this harness. It also takes care of the right side lighting.
This harness takes care of the wires that hook up to the timer. U.S.A. For the 26-7 cars with the coil box mounted on the motor.
The authentic wiring needed for battery operated horns. Wire from terminal to horn, and horn to horn button. USA
The wiring for the headlights and tail lights. The early 1919-25 harness takes care of the lighting on the left side of the car, and the T-5031 accomodates the right side. TT trucks use T-5041,...
Holds the wire that runs from the timer to the coil box at the frame. Clip sandwiches between the top of the frame and the wooden hood shelf at the front hood shelf mounting bolt.
This is the wire that runs from the mag plug to the coil box on cars without starters. Brown with copper ends. U.S.A.
These wires are the heavy size wire as used by Ford. Come with authentic brass terminals, black with red tracer. U.S.A.
Four different styles available. The show Champion plug is the original take-apart style. The go Champion plug is a non-original style replacement as is the Motorcraft plug. Adapters are only...
This wire loom fits all cars with dash mounted switches. Switch-dash harness. U.S.A.
Original style wire wrapped grommets that the tail light wire is routed through. The set includes the special spring and fiber retainer that holds the wire at the tail light body. 6 piece set. U.S.A.
