1926-1927 Wire Wheel Hub Bolts You will need 5 of each per wheel. Studs need to be swedged in place. You need to order the A-1109-T tool for swedging. U.S.A.
1926-1927 Wire Wheels New reproduction of the original style 21" wheels for the 1926-27 Model T. Wheels come in primer. Excellent quality!
1926-27 Front Wire Wheel Hub This is the front hub only for 1926-27 Model T's with wire wheels. Wheel studs, and bearing races are not included. U.S.A.
1926-27 Rear Wire Wheel Hub These rear wheel hubs are made specifically for the 1926-7 T with wire wheels. This is the hub only, studs and drum are not included. U.S.A.
Antique Ford Brake Drums Replace those cracked or worn Ford brake drums with good heavy new ones. Made by the same manufacturer that made brake drums for Ford originally! The 1926-27 wire style holes are not notched...
Authentic Ford Hub Bolts For the purist, we can now offer these authentic Ford hub bolts. Heads are slightly smaller than our regular bolts and thread length is shorter. These antique Ford hub bolts are long enough to...
Axle Keys Check your old keys to be sure that they aren't worn. Because worn keys can damage the keyway and axles cost more than keys.
Spare Tire Mount
Dust Shield Fits in the inside section of front hub keeping dirt and dust from getting into the bearing. Modern type seal. U.S.A.
Felloe Rivets Steel rivets that attach the wood felloe to the rim on early T's. U.S.A.
Felt Hub Washer Use on both front and rear hubs to keep out dirt. U.S.A.
Floating Rear Hubs With floating hubs, the weight is transferred from the axle housing directly to the wheel putting less strain on the axle shaft. In the event on an axle braking, you won't lose your wheel with...
Ford Demountable Wire Wheel A Model T demountable wire wheel will attach to your old wood wheel hub. You still use your old demountable rims. A Ford demountable wire wheel comes with brass hub caps on 30 x 3-1/2" wheel,...
Front Hub Bearing Set This set coontains both the bearing and the cups for a complete change over for any year Model T. Prior to 1919 Ford used a ball bearing unit. You can change over to the better roller bearing...
Front Hub Dust Seal Retainer Dust rings for the front wheels. Correct for the 1909-18, but will work on all years. 1918 and later dust rings didn't have the embossing on them the wheel manufacturer can be identified by the...
Hub Adapter Bolt Kit When using our T-2888-W wheel adapters, these studs are required if you have the floating style rear hubs. One kit per wheel.
Hub Bolts & Nuts Hub bolts for the wood wheel hubs. These have the correct high round head with square shoulders. The nuts are the correct thin style nuts. Nuts do not come with bolts. U.S.A.
Hub Puller (Rear) No more ruined axles with this tool! Threads on rear hub cap threads and a bolt threads down against the end of the axle shaft and keeps outward pressure on the hub while you tap the end of...
Hub Puller Adapter If you already have our T-2815-T hub thread repair tool, you can purchase this part which will convert it into a puller. U.S.A.
Inner & Outer Wheel Bearing Balls If you are still running the original style front wheel bearings with the loose balls rather than the tapered rollers, these are replacement balls only. Large is used for the inners, small for...
