Model T Ford Valves & Tappets | Model T Valves

When going to the oversize valve, you will have to ream the block where the valve rides. U.S.A.

Part Number	Specifics	Price
T-3052-015R	5/16+.015 (.3275)	$42.75 / ea.
T-3052-030R	5/16+.030 (.3425)	$42.75 / ea.

See additional features

Valves

Made of stainless steel foe long life! Available oversized if your block is worn. Fits 1909-27 T's. We recommend a valve clearance of .010" on intake and exhaust.

Part Number	Specifics	Price
T-3052-AS	.312 Standard (Each) 1909-27	$7.50 / ea.
T-3052-AS-Q8	.312 Standard (Set of 8) 1909-27 (Set of	$58.95 / set
T-3052-BS	.327 .015 O.S. (Each) 1909-27	$7.50 / ea.
T-3052-BS-Q8	.327 .015 O.S. (Set of 8) 1909-27 (Set of	$58.95 / set
T-3052-CS	.342 .030 O.S. (Each) 1909-27	$7.50 / ea.
T-3052-CS-Q8	.342 .030 O.S. (Set of 8) 1909-27 (Set of	$58.95 / set

See additional features

Valve Setting Tool

Get the most power out of your Model T. This tool times the valves in relation to the piston travel. Comes with complete instructions. U.S.A.

Part Number	Specifics	Price
T-3052-KRW	1909-27	$16.75 / ea.

Valve Lapping Tool

A hard plastic handle that has cups on both ends. U.S.A.

Part Number	Specifics	Price
T-3052-T		$8.15 / ea.

See additional features

Valve Spring Tool

Hooks over manifold stud and makes collapsing the valve springs a breeze! U.S.A.

Part Number	Specifics	Price
T-3053-T	1909-27	$22.95 / ea.

See additional features

Valve Springs

Made for us by one of America's oldest valve spring manufacturers. Why take a chance with weak springs! An inexpensive item that will pay for itself with better performance and longer life! U.S.A.

Part Number	Specifics	Price
T-3054	Each 1909-27	$0.65 / ea.
T-3054-Q8	Set of 8 1909-27	$5.10 / set

Valve Seats

Not original equipment, but many engine builders are using them now. Cast iron. Block must be bored to accept these. 45 degree seat angle, 1,312" I.D., 1.629" O.D., .216" thick. U.S.A.

Part Number	Specifics	Price
T-3055	Each 1909-27	$2.85 / ea.
T-3055-Q8	Set of 8 1909-27	$22.00 / set

Valve Spring Retainer

A deep cupped seat that holds the spring and pin in place. U.S.A.

Part Number	Specifics	Price
T-3056	Each 1909-27	$0.70 / ea.
T-3056-Q8	Set of 8 1909-27	$5.50 / set

Valve Pins

Hardened pins machined to the correct length. Holds the valve spring retainer on the valve. U.S.A.

Part Number	Specifics	Price
T-3057	Set of 8 1909-27	$1.60 / set

Solid Tappets

These are the original style solid tappet. If the guides are worn, ream them and use an oversize tappet. Standard size is .437. Complete sets only. U.S.A.

Part Number	Specifics	Price
T-3058-A	Standard 1909-27	$57.00 / set
T-3058-B	O.S. (.452) 1909-27	$57.00 / set

See additional features

Tappets

An improvement over the solid tappet. Using a wrench to make the adjustment is a lot easier. Single locks are much easier to adjust. Sold in sets of 8 only. Valve stems may need ground to give...

Part Number	Specifics	Price
T-3058-F	Single Lock Standard 1909-27	$71.75 / set
T-3058-G	Single Lock .452 Dia 1909-27	$71.75 / set
T-3058-H	Single Lock .467 Dia 1909-27	$71.75 / set

Tappet Reamers

If you are replacing the standard valve tappets with an oversize, you will need one of these reamers to bore the block out to accept the larger size. U.S.A.

Part Number	Specifics	Price
T-3058-DR	For .015 O.S. Tappet	$60.00 / ea.
T-3058-ER	For .030 O.S. Tappet	$55.00 / ea.

Tappet Locking Bolt/Nut

Screws into the end of the tappet to adjust valve clearance. Double lock tappets only. U.S.A.

Part Number	Specifics	Price
T-3058-LB	1909-27	$1.10 / ea.

Cylinder Valve Cover

A good replacement for those damaged or missing side covers. Not exactly like the originals, but they do the job. Need 2 per car. For 2-pc. design valve covers only. U.S.A.

Part Number	Specifics	Price
T-3110	1912-21	$11.40 / ea.

Valve Cover Gasket

For the early 2-piece style. U.S.A.

Part Number	Specifics	Price
T-3111-B	1911-21	$2.50 / pr.

Valve Cover Gasket

For the later style one piece style. U.S.A.

Part Number	Specifics	Price
T-3111-C	1921-27	$2.50 / ea.