To order multiple products on this page, enter the quantity for each product you would like to purchase, and then select "add to cart" to checkout.
FOr the 25-27 pick-up, this is the bracket you need to attach the tail light to the bed. Attaches to the cross member under the bed. U.S.A.
This gasket set is for the accessory tail lamp that was offered in 26-27 that had 2 bulbs. It was a larger light than the normal 26-27 tail lamp. U.S.A.
The brass cap to finish off the Jon Brown side lamp. This is for the model #110. Has correct imprint on top. 1913-14 U.S.A.
The brass cap to finish off the Jon Brown tail lamp. This is for the model #115. Has correct imprint on top. 1913-14 U.S.A.
Available for the E and J's, Brown and Universal. Excellent reproductions that are well detailed! Comes with nickle plated cover and a wick installed. 1909-15.
Clear celluloid lens used in the 1919-23 electric tail light for the light to shine on the license plate. 1-1/4" x 3-5/8". U.S.A.
A faithful copy of the original fender mounted tail lamp that was used in 26-27. Comes with left hand bracket for mounting to fender. If putting lamps on both sides, you will have to order the...
Use these universal style sockets to convert any side or tail lamp to a dual filament bulb that can be used for turn signals or just to convert a gas lamp to electric! You will have to modify...
This chimney was used on the early E & J lamps that were used in 1909-12. They said 'PAT. DEC 9 1908' on them. U.S.A.
The brass cap to finish off the side and tail lamps. The #8 was used for the side lamp and the #9 was used on the tail lamps. U.S.A.
A well made red tail light lens for the 1920-25 electric tail light. U.S.A.
A repo of the original electric taillight, but we have made some improvements! We build them with a dual filament bulb which is a big help when adding turn signals to your T. The left version...
A formed steel bracket for the fender mount style tail lamp. Lefts are no being produced.
Getting stuck in the dark with an early T can be an unsafe experience! This handy lamp snaps over the throat of the burner assembly and gives you a nice bright LED lamp that people can see! Can...
For side and tail lamps. This is missing on most lamps. Made of brass and used on Corcoran, J. Brown, and Victor. U.S.A.
3-11/16" diameter clear lens for side lamps. U.S.A.
Same as the T-6484-DX except this one is red. Used in the 24-27 oil lamp. U.S.A.
3-11/16" diameter lens for the tail lamp. Red glass. U.S.A.
The clear lens for the side of the oil tail lamp. 2-1/8" diameter. Convex on the outside. U.S.A.
These red lamps are meant to slide into the square portion of the top outer edge of the pickup bed side. you can use these just as parking lamps or as turn signals. You will have to fish your...
