To order multiple products on this page, enter the quantity for each product you would like to purchase, and then select "add to cart" to checkout.
Polished brass windshield frame complete with brass glass setting channel. Top=41-1/2" x 12-3/4" Bottom=41-1/2" x 14-3/4". Torpedo is 41-1/2" x 13-3/4" Top and bottom. U.S.A.
Steel Frame comes complete with brass glass channel, filler blocks and glass clamps. Top=41-1/8" x 12-3/4", Bottom=41-1/8" x 14-3/4". Divider must be adapted to work. If you purchase upper or...
An exact repo made of steel. Comes with filler blocks and glass clamps. Glass channel must be purchased separately. Top=39-1/8" x 10" Bottom=39-1/8" x 12-1/8". Upper and lower frames do not include...
Open Cars U.S.A.
An exact repo made of steel. Comes with filler blocks and glass clamps. Glass channel must be purchased separately. Top=37"x10-1/4" Bottom=38-1/2" x 10-1/8". Upper and lower frames only do not...
Open Car. U.S.A.
An exact repo made of steel. Comes with filler blocks and glass clamps. Glass channel is not used on 26-27's. Top=38-1/2" x 10-1/2" Bottom=35" x 9-3/4". Upper and lower frames do not include...
Special nut used on the windshield hinge from 1915-17. U.S.A.
The rubber gasket for the bottom and sides of the windshield frame of the closed cars. U.S.A.
The piece of rubber between the windshield frame and cowl on the open cars. .275" Thick. .945" wide, 42" long. U.S.A.
The windshield brackets hold the windshield frame to the firewall. The dash brackets are for joining the 2 piece dashes.
The rubber seal that inserts into the bottom of the lower section of windshield. The lip rubs against the cowl for sealing in the 26-27 open cars. .235" wide @ T x 1.280" tall, 42" long. U.S.A.
The rubber that seals up the upper and lower windshield halves. .230" wide glass groove, 42" long. Use black silicone to install. U.S.A.
This channel holds the glass in the frame. All channel is brass. U.S.A.
The rubber strip that fits into the windshield post with the lip against the windshield frame. 1.75" Thick x .670". Sold by the foot. U.S.A.
Fits 1926-27 Coupe and Tudor Sedan. Swing arm brackets come riveted to frame, frame rubber included. Hinge is not included and must be ordered separately if needed, A-45411-AR (Aluminum), or...
You will need a total of eight of these. 4 hold the bottom of the lower windshield frame to the cowl, and 4 hold the upper frame glass clamps. A set consists of 1 screw and 1 sleeve nut.
Fits 1909-22 Open Cars but can be modified to work on 1923-27's. Brackets are unfinished cast brass, acorn nuts are brass, "C" shaped part of the bracket is unfinished steel. GLASS IS NOT INCLUDED...
Spring loaded center for the windshield hinge. U.S.A.