- Male Eyelet Studs
Used with our T-7979-F. You can nail shank down to use as a rivet for attaching to the buggy rail on early T's. These are also nailed into the rear bow to hold the T-7831-RL roll up curtain straps...
- Male Murphy Fasteners
Used in areas that require the male fastener to be attached to material. Backing plate included with each fastener. U.S.A.
- Mounting Screws
A set of 10 stainless steel sheet metal screws with slotted heads. Used for anchoring the male common sense fasteners. U.S.A.
- Prop Nuts
All are 2-piece design like the original with 7/16-14 thread. The 1-1/2 diameter are actually nuts from a Model A that will work. The authentic one is the correct Model T design with high domed clad.
- Rear Curtain Straps
These top quality straps come with the "D" ring, buckles, and footman loop to attach them. These straps take the stress off the rear curtain when the top is in the up position. The early 1909-10...
- Rear Top Bracket
Fits 1913-14 Touring. Long bracket attaches to body for rear top iron to attach to the body. Kit form, you will have to bend ear on the bottom, cut to length and weld top section. Made in Sweden.
- Replacement Style Top To Windshield Straps
These do the same job as the original strap that went from the top to the bracket at the windshield hinge except these have a modern snap where they attach at the windshield hinge that has a...
- Roadster Saddle Arm Bracket
This female threaded bracket in the body that the T-3858-A top saddle arm threads into. Saddle arm is included. Fits Roadster only.
- Roll-up Back Curtain Straps
If your "T" has a roll up style rear curtain, these black leather straps are what keep the curtain in place when it is rolled up. Comes with special headed nails for attachment. U.S.A.
- Saddle Arm Bracket
Goes in the back corners of the touring bodies. This is what the T-3858-T top saddle arm mounts to. Kit form, you will have to bend ear on bottom, cut to length, and weld to top section. Made...
- Saddle Pads & Straps
Black leather pads with the matching straps. Protects and holds the top when in the down position. U.S.A.
- Saddle Stud Hole Plugs
Used on the 1922-27 Roadsters, Touring, and Roadster Pickup. If you are not using the top saddles and don't have the studs coming out of the body, these will plug the holes in the body. U.S.A.
- Snap Fastener Tool
A handy inexpensive tool for fastening snap style fasteners in material.
- Snap Stud
Durable style snap stud used to attach side curtains and top to the body. 3/8" long thread. U.S.A.
- Straight Saddle Arm
For the later cars and for use with the saddle bracket with 1/2" hole. U.S.A.
- Top Boots
Made of black colonial grain material, this boot slips over yout top when it is in the down position. Keeps your top from collecting dust and dirt when driving. USA
- Top Bow Clips
Theses clips slide around the pivot point of the top irons where they attach to the body. The two legs of this clip slide into the cross drilled hole in the top iron mounting stud and hold the...
- Top Bow Rivets & Tools
These rivets are used to secure the wooden top bows to the top irons. Solid rivets were used on earlier vehicles, tubular on later. Setting tool for solid rivets must be used with a standard...
- Top Bow Side Straps
Black leather strap with brass cotter pin. Attaches to top iron and cotter pin holds top iron to the body. U.S.A.
- Top Bows
Steam bent oak top bows. Measurements given are O.D. Roadsters are sets of three, Touring is a set of four.